Qué se entiende por mantenimiento y por qué se realiza

What is maintenance and why do we do it?

Old maintenance practices, and most of the current ones, both in the private sector as well as in the public sector, are usually understood as activities related to equipment reparation after a break down. Webster’s definition of maintaining is “to keep in an existing state, preserve from failure”. This implies that maintenance must consist of actions taken to prevent an equipment or facility of failing, keeping them in good work condition. Sadly enough, data obtained in numerous studies from the last decade show that most companies do not invest enough resources to keep their equipment and facilities in good condition. On the contrary, they wait until they break down to take the corrective measures needed to repair or replace the equipment. Nothing lasts forever and every piece of equipment has its lifecycle. For example, an equipment can be design to last for 5,000 hours, but with a proper use and maintenance it could last for 10,000 hours.

The need of maintenance is based on the actual or imminent fail. Ideally, maintenance is carried out to keep equipment and systems running efficiently during at least its usual life cycle. As such, practical functioning of equipment is a function based on time. If you want to graphically represent the failure rate of a piece of equipment in relation to time, it is probable that the graphic takes the shape of a bathtub, such as the one shown in picture 1, where axis Y represents the failure rate and axis X represents time. This curve can be divided in three periods: premature dead, lifecycle and exhaustion period.

JA ENG

The first period, the premature dead one, of the curve is characterized by a high rate of failure, followed by a decreasing failure period. Most of the failures related at this time are linked to bad design, bad installation or wrong use. The premature dead period is followed by a period with a nearly constant failure rate know as life cycle. There are many theories about why equipment fails in this time area. Most of them agree that poor preventive maintenance has often a key role. It is also generally agreed that exceptional practices related to predictive and preventive maintenance can extend this period in time. Exhaustion period is characterized by a higher and higher rate of failure. In most cases, this period includes a regular distribution of failures during design life but in reverse.

The lifecycle of most of equipment needs periodical maintenance. If we use the example of a car, we could say that filters must be changed, front-end alignment must be maintained, oil change and proper lubrication are needed and so on. In some cases, certain pieces need to be replaced, for example, the timing belt, to ensure the proper functioning of the main piece of the equipment, the car in this particular case, once its design life has ended. Each time we do not carry out the maintenance activities planned by the designer, we shorten the operational lifecycle of the equipment. So, what are our options? For the last 20-30 years the different approaches to how maintenance can be carried out to ensure that the equipment reaches or exceeds its design life are focused on proactivity, thus, on a proper preventive maintenance and more and more on preventive maintenance accompanied by proper predictive maintenance to complement it.

And now, we will show the advantages and disadvantages of the different types of maintenance:

CORRECTIVE MAINTENANCE

Advantages:

  • Low cost
  • Fewer workers needed

Disadvantages:

  • Costs increase due to unplanned equipment stops
  • Labour costs increase, especially when extra time is needed
  • Extra costs due to equipment repair or replacement
  • Secondary equipment can suffer damage during primary equipment failure
  • Inefficient use of human resources

PREVENTIVE MAINTENANCE

Advantages:

  • Inactivity time gets shorten, so equipment availability increases
  • Maintenance regularity allows better flexibility
  • Components life cycle extends
  • Energy savings
  • Failure rate decreases
  • Costs reduction around 12-18% in comparison with corrective maintenance

Disadvantages:

  • It is still probable that failure happens
  • Intensive workforce
  • It includes activities that may not be really necessary but recommended
  • These activities that may not be necessary may accidentally cause damage to other components

PREDICTIVE MAINTENANCE

Advantages:

  • Components availability and lifetime increases
  • Equipment inactivity time decreases
  • Materials and labour costs decrease
  • Improves employees’ spirits
  • Costs reduction around 8-12% in comparison with preventive maintenance

Disadvantages:

  • Significant initial investment in diagnosis equipment
  • Investment in personnel training increases
  • Potential savings are not easily perceived by the C-Suite
  • Meaningful savings are only perceived in the long term
share on your social networks

Do you want more information about what we do in Consultancy, Training and Research en Facility Management?

Hola, ¿cómo
podemos ayudarte?

Rellena el siguiente formulario y te enviaremos el reglamento interno y código ético:

Hello, ¿how
can we help you?

Participate in the Observatorio FM

You can choose between these 3 options to participate:





How to participate?

Collaborating with the Observatorio FM is a personal and voluntary decision, and there is no contractual obligation or economic retribution for it.

Any interested person can apply to participate as a leader of a new project, or apply as a collaborator in an existing one.

A technical committee will evaluate the subject matter of the proposed projects and the applications of the participants, deciding which ones are carried out and by whom.

Each person decides how much they want to dedicate, depending on their availability or type of project. The aim is for it to be an altruistic activity and not an additional workload.

What does it consist of?

To promote and publish studies that help professionals in the sector and to help others understand our profession and discipline.

The results and deliverables are shared openly, always acknowledging the contributions of all authors and contributors.

The Observatorio FM’s activity will respect the objectivity, ethics, rigour and good practices that govern our Research area.

Contributors have access to the best collaborative tools, sectoral information and contacts, as well as the assistance of expert consultants and researchers at international level.

Research

FM Observatory

FM Observatory is a platform which develops and disseminates Facility Management information. It’s accessible to all those who’d genuinely like to participate. Ethical use and objectivity are essential, and all results must be shared. You decide how long you devote to it and what you want to achieve.

You can participate as:

We will provide:

All contributions will be given credit in completed projects.

Research

Projects

We are part of the European research group and we work in international teams to develop different types of initiatives:

We also work for service providers who require support with decisions linked to:

Research

Standardisation

As accredited experts in the drafting processes of European and International standards on Asset and Facility Management, we are the perfect partner to assist you with:

FMHOUSE is the only Spanish-speaking consulting firm that participates in these processes.

Research

Publications

At FMHOUSE we think that progress made in Facility Management should be shared, so we strive to produce and publish the following material:

The “FM Observatory” is open, should you like to contribute with a publication.

Consultancy

Workplace

Our view of spaces or workplaces from a Facility Management perspective leads to a better understanding of such a need as a service, as it is essential to apply the same logic and methodology.

Generally we offer:

We apply our knowledge and experience to offices, learning spaces, shopping centres and the industrial environment.

Consultancy

Benchmarking

In order to make the right decisions, clear accurate market data as well as facts about the organisation itself is essential. In the Facility Management environment, this is even more critical due to the impact it has on business.

Examples of benchmarks:

These services are requested mainly by end users, but also by service providers.

Consultancy

Customer Experience

Facility Management’s overarching goal is customer satisfaction, whether they are internal or external. Understanding their feelings and needs is the key to offering a good service.

Our support is based on:

We strive to understand and get to know our clients’ customers, in all sectors and types of businesses.

Consultancy

Digital Transformation

The Facility Management world is experiencing a major transition to digital environments. We help our clients understand how it impacts them and assist them throughout the change.

Our areas of support are:

We operate as independent advisers, not as brand vendors.

We advise end-users and service providers.

Consultancy

Service Design

All kinds of companies need to define or improve the way in which it structures supporting activities provided by Facility Management.

Our main products are:

Our proposals are structured according to individual requirements.

We help end customers and also service providers.

In FMHOUSE, we use third party cookies to improve our services. If you continue with navigation, we will consider that you accept our terms of use y nuestra privacy policy y de cookies